Motion Control – Linear Focus Actuator Forestville, CA – Motion Control – The LFA-1205 Linear Focus Actuator is a high performance compact positioning system. It was specifically developed for optical applications requiring both high precision and high-speed positioning over a short to medium stroke.
Archive for the ‘Sub-micron’ Category
Motion Control – New! Three-axis Gimbal Mounts Feature High Resolution, High Load Capacity, Stability, and Four Motor Options!


Motion Control – Three-Axis Stage! Motion Control – Four high resolution, high Load, high stability three axis gimbal mounts have been released by OES (Optimal Engineering Systems, Inc.). These four new AU270-YPR Three Axis (Yaw, Angular Pitch, and Roll) Gimbal Mounts were developed to be used with larger and heavier: Cameras, telescopes, directional antennas, optics, […]
Motion Control – Rotational Voice Coil Stage Offers Galvo Like Performance at a Fraction of the Size and Cost!


Motion Control – Rotational Scanner The Motion Control RVC-9025 Rotational Voice Coil Stage provides a means to quickly and repeatably steer an optical beam with a diameter of up to 25 millimeters over 90° with 25 microradians of resolution. Forestville, CA, — The motion control RVC-9025 provides galvo like performance at a fraction of the […]
Motion Control – High Performance Ultra Compact Stepper Motor Positioning Stage From Equipment Solutions!


Motion Control – Miniature Stepper Motor Stage Forestville, CA, – — The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor provides a […]
Motion Control – High Precision Three-axis Stages Adds A New Dimension to Pitch and Roll Stages … … Lift!


Motion Control – ZGG Stage – Lift Plus Dual Goniometers Van Nuys, CA – Motion Control – New High Precision Three-axis ZGG-60-10-15 Series of Lift, Pitch, and Roll Stages have been released by Optimal Engineering Systems, Inc. (OES). These compact motion control stages feature 60 mm +/- 2 mm (2.362 in. +/- 0.078 in.) of […]
Motion Control – Measure Very Small Angular Displacements Of Very Small Parts With Low Cost Digital Autocollimator


Motion Control – Miniature Autocollimator Forestville, CA, Motion Control — The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that […]
Motion Control – Sub-micron Z-Axis Positioning Stages with Four Motor Options Introduced by OES!


Motion Control – Z-axis Stages Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) has added vertical stages to their extensive line of high accuracy, high resolution lift stages.
Motion Control Homepage – High Precision Linear, Pitch, Roll, and Yaw Positioning Stages Feature Four Motor Options!


The Motion Control Homepage Spotlights – Four-axes Linear, Pitch, Roll, and Roll Stages Van Nuys, CA – Motion Control – The new Motion Control XGGR-50-10-15-60 Series of Four-axis Linear, Pitch, Roll, and Yaw Stages from OES (Optimal Engineering Systems, Inc.) is the integration of a Linear-axis stage, two Goniometer Stages, and […]
Motion Control – High Precision Linear Focus Actuator, the LFA-2014 from Equipment Solutions Features 200 Nanometer Positioning Repeatability!


Motion Control – Linear Focus Actuator Forestville, CA, – — The motion control – LFA-2014 Linear Focus Actuator has a 20 millimeter clear aperture, 14 millimeters of linear motion, 200 nanometer positioning repeatability, non-contact electro-optic analog position sensor, fully integrated SCA814 Servo Amplifier, integrated heat sink, motor coil temperature sensor, and integrated […]
Motion Control – New! Large Three-axis Gimbal Mounts Feature High Resolution, and Four Motor Options


Motion Control – Solenoid Drivers Van Nuys, CA – Motion Control – Designed for larger cameras, tracking devices, telescopes, optics, and other devices, four new, high resolution, three axis gimbal mounts have been released by OES (Optimal Engineering Systems, Inc.). This new series of Three Axis Gimbal Mounts are 588 mm wide […]
Innovations in Motion Control – XY-Theta Alignment Stages Feature: Sub Micron Resolution!


Innovations in Motion Control – XY-Theta Alignment Stages! Van Nuys, CA – — Innovations in Motion Control Technology – Two new XY-Theta Alignment Stages have been released by Optimal Engineering Systems, Inc. (OES). The XYR-15-60-01 and the XYR-15-60-04 Alignment Stages feature 15 mm (0.58 in.) of travel in both the X and […]
Motion Control – Eight New High Resolution, High Repeatability Yaw-and-Pitch Stages for the Measurement of Angles and Curvatures!


Motion Control – Yaw and Pitch Stages Van Nuys, CA – Motion Control – Eight new Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). These new series of high precision Yaw-and-Pitch Stages integrate Goniometers as the lower stage (yaw axis) and a rotary stage as the upper stage (pitch axis). The […]
Motion Control – Low Cost, High Precision Vertical Lift Stage from OES!


Motion Control – Vertical Lift Stage Van Nuys, CA – — Motion Control – The AT10-120 Motorized Vertical Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, low profile, high load vertical lift stage that can be easily integrated into almost any application. The large 220 mm x 140 mm (8.7 in. 5.5 […]
Motion Control – Linear Focus Actuator from Equipment Solutions Features 200 Nano Meters Repeatability!


Forestville, CA, – — Motion Control – This LFA-0604 Linear Focus Actuator: Flexure guidance system, 6 millimeter clear aperture, 4 millimeters of linear motion, 90 G’s acceleration (no load), 200 nanometers positioning repeatability, non-contact electro-optic position sensor, direct SCA814 Servo Controlled Amplifier compatibility, 38mm x 24mm, 80 grams
Motion Control – Parallelogram Voice Coil Positioning Stage Is a Complete Positioning System!


Motion Control – High Performance Parallelogram Voice Coil Positioning Stage Forestville, CA – Motion Control – Components – The PVS-5.5 Parallelogram Voice Coil Stage from Equipment Solutions is a complete, compact high performance positioning system. This compact stage (37mm x 31 mm x 32 mm) weighing just 70 grams features a 5 mm clear aperture […]
Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!


Motion Control – Stepper Motor Motion Control Systems Van Nuys, CA – — Motion Control – To complement the Optimal Engineering Systems’ (OES) expanding line of single and multi-axis motion control stages, OES has added the ADAGIO-X-STPR Series of Motion Control Systems.
Motion Control – High Speed, High Force, Sub-micron Positioning, Voice Coil Stage Features 20 mm Aperture!


Motion Control – Sub-micron Position Stage Forestville, CA, — — Motion Control – High speed, high force, sub-micron, >300 nanometer (1.1811 10-6 in.) positioning resolution, cross roller voice coil stages are self-contained, compact, and can be mounted in a horizontal or vertical axis. The high speed, 20 mm (0.7874 in.) travel, Equipment Solutions’ Motion Control […]
Motion Control – Three-Axis Yaw, Pitch, and Roll Positioning Stages Feature Four Motor Options!


Motion Control – Yaw Pitch and Roll Stage Van Nuys, CA – Motion Control – New compact three-axis, Yaw, Pitch, and Roll Stages from OES (Optimal Engineering Systems, Inc.) feature four motor options to meet the precision and speed of travel requirements of an application. The YPR-10-15-60 Series of Three-axis Yaw, Pitch, and Roll Stages […]
Motion Control – Ultra-High Precision, Compact, Low Cost, Optical Positioning System Features Zero Translation from Equipment Solutions!


Motion Control – Linear Focus Actuator Sunnyvale, CA, — Motion Control – Optical Positioning System – Developed for precision optical positioning applications the LFA-1210 Linear Focus Actuator features a patented zero-translation tangential flexure for high speed travel. The clear aperture, 10 mm (0.394 in.) stroke length and standard 12 mm optics mount (or […]
XYZ in Motion – Select from the Large Variety of Precision XYZ Axis Stages to Suit Your Specific Application from Optimal Engineering Systems, Inc. (OES)!


XYZ in Motion – XYZ Axis Stages to Suit Specific Applications! Van Nuys, CA – — XYZ in Motion – OES (Optimal Engineering Systems) has introduced a series of high precision, low cost XYZ positioning stages that can be easily integrated into new and existing applications. They are offered in 5 travel lengths […]