Archive for the ‘Motion Control Products – Suppliers/Manufacturers’ Category

Motion Control – AMC Introduces the FE060-25-IPM FlexPro® Servo Drive with IMPACT™ Architecture

Motion Control – Servo Drive Motion Control – ADVANCED MOTION CONTROL AND POWER ALL IN ONE COMPACT PACKAGE       Vaughan, Ontario, Canada — Motion Control – Advanced Motion Controls (AMC), a US leading provider of servo amplifiers, is proud to announce the release of the FE060-25-IPM FlexPro® series servo drive. This state-of-the-art drive […]

Motion Control – One Piece ETX Linear Bearing/Pillow Blocks Can Be Used In Radioactive Environments!

Motion Control – ETX Pillow Block/Bearings for Radioactive Environments E. Longmeadow, MA – Motion Control – Components – Linear Motion – LM76 now offers one piece ETX Linear Bearing/Pillow Blocks that will not degrade in a radioactive environment! Machined from a solid block of self lubricating ETX, linear bearing-blocks have high strength, excellent wear resistance, […]

Motion Control – Eight New High Resolution, High Repeatability Yaw-and-Pitch Stages for the Measurement of Angles and Curvatures!

Motion Control – Yaw and Pitch Stages   Van Nuys, CA – Motion Control – Eight new Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). These new series of high precision Yaw-and-Pitch Stages integrate Goniometers as the lower stage (yaw axis) and a rotary stage as the upper stage (pitch axis). The […]

Motion Control – Meet the Voltage, Duty Cycle, and Force Requirements of Many Applications with a Series of 18 Push Type Open Frame Solenoids with a 1 Inch Stroke!

Motion Control – Push Type Open Frame Solenoid Motion Control Solenoids – Van Nuys, CA — Push Type Solenoids from Magnetic Sensor Systems (MSS) includes a series of 18 different low-cost open frame solenoids to select from based on the Voltage, Duty Cycle, Force of up to 96 oz (26.7 N) and stroke requirements of […]

Motion Control – Exor Introduces Next Generation Wireless HMI: Exor X5

Motion Control – Wireless HMI!       Vaughan, Ontario, Canada — Motion Control Components — Exor, a leading provider of industrial automation solutions, is proud to announce the release of its latest product, the Exor X5 Wireless HMI. This cutting-edge device is designed to revolutionize the way industrial operators interact with their machines and […]

Motion Control Products Featured on Facebook

Motion Control – Facebook Pages MotionShop.com invites you to check out these Facebook pages …

Motion Control – Compact 1.25 Micron Resolution Direct Drive Linear Actuator Features High Speed, Zero Cogging!

Motion Control Stage- Hollow Core Voice Coil Stage Van Nuys, CA – Motion Control – A New, compact, Electric Cylinder or Linear Voice Coil Actuator 38.1 mm (1.500 in.) in diameter, with a 12.7 mm (0.500 in.) stroke, and a housing length of 69.9 mm (2.750 in.) long has been released by Moticont.   This […]

Motion Control – Hybrid Linear Bearings for the Times Bearing Failure Just Can Not be Allowed to Happen!

Motion Control – Ceramic Hybrid Linear Bearings E. Longmeadow, MA – Motion Control – Linear Motion – Pegasus Hybrid Linear Bearings for the times Bearing Failure just can not be allowed to Happen!  That is the the time when Down-Time is more costly then the price of the bearings.

Motion Control Products – CERAMICSPEED Radial Bearings Are FDA and EC1935 Approved for Medicine and Food Production and Preparation!

Motion Control Products- Hybrid Ceramic Ball Radial Bearings     E. Longmeadow, MA –Motion Control Products- CERAMICSPEED Hybrid Radial Corrotec/CorroCoat Bearings are designed for environments of high humidity, have been approved in accordance with FDA 21 CFR (Code of Federal Regulation covering medicine and food), and have an EC No. 1935/2004 authorization. Superior life and […]

Motion Control – NEW! A Series of 600 mm to 1000 mm High Precision Ball Bearing Linear Guide Stages Available from OES!

Motion Control – Long Travel Linear Stages       Van Nuys, CA – — Motion Control – A series of long travel, low cost, low profile, motorized, profile rail positioning stages are now available from Optimal Engineering Systems, Inc. (OES). The AQ140 Series of linear stages are available off-the-shelf in travel lengths of: 600 […]

Motion Control – Advanced Motion Controls Unveils Next-Generation FlexPro® EtherNet/IP Servo Drives

Motion Control – EtherNet/IP Servo Drives       Vaughan, Ontario, Canada — Motion Control – The FlexPro® drive series is AMC’s latest family of digital servo drives designed for high power, small size, and reliable servo motor control. The drive architecture allows for higher power densities while still maintaining reliability and versatility. The advanced […]

Motion Control – Application – Minuteman Flange Blocks; 20 Million Cycles and Counting!

Motion Control – Flange Blocks Application

Motion Control – Miniature Voice Coil Stage features 1 Micron Repeatability!

Motion Control – Miniature Voice Coil Stage!       Forestville, CA, — Motion Control – This VCS-10V Voice Coil Stage: 10mm of linear motion; Ball bearing guidance system; 1 micron position repeatability; 40 G’s acceleration; Non-contact electro-optic position sensor; Kinematic load mount; Direct SCA814 Servo Controlled Amplifier compatibility; 33 x 36 x 76mm, 230 […]

Motion Control – Low Cost, High Precision Vertical Lift Stage from OES!

Motion Control – Vertical Lift Stage Van Nuys, CA – — Motion Control – The AT10-120 Motorized Vertical Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, low profile, high load vertical lift stage that can be easily integrated into almost any application. The large 220 mm x 140 mm (8.7 in. 5.5 […]

Motion Control – Open Frame Series of 18 Pull Type Solenoids with a 1 Inch Stroke Can Meet the Voltage, Duty Cycle, and Force Requirements of Many Applications!

Motion Control – Open Frame Solenoids Motion Control – Van Nuys, CA – The S-18-100 Series of Open Frame Pull Type Solenoids from Magnetic Sensor Systems (MSS) includes 18 different solenoids to select from based on the Voltage, Duty Cycle, Attractive Force (up to 100 oz) and Stroke requirements of the user. MSS Solenoid coils […]

Motion Control – Nippon Pulse Geared Stepper Motors, High Torque in Small Package!

Motion Control – Geared Tin Can Stepper Motors       Vaughan, Ontario, Canada — Motion Control – A feature of Nippon Pulse’s popular and reliable stepper motors, which we have been manufacturing since 1960, is the ability to add reduction gearheads. These gearheads have a wide range of ratios, from 1/400 to 6/25. In […]

Motion Control – Hollow Core Linear Voice Coil Servo Motor Features 19.1 mm Stroke, High Force-to-Size Ratio!

Motion Control – Miniature Voice Coil Motor     Van Nuys, CA – Motion Control – The HVCM-051-032-013-01 Linear Voice Coil Motor released by Moticont, features a high force-to-size ratio and a 19.1 mm (0.75 in.) stroke. A low inertia, high acceleration/deceleration, high speed, clean and quiet, non-commutated, hollow core brushless servo motor, the HVCM-051-032-013-01 […]

Motion Control – Metric High Precision Sintered Bronze, Bronze Alloy, and Iron Bearings Are “Self Lubricating!”

Motion Control – Metric-High-Precision-Sintered-Bearings E. Longmeadow, MA – Motion Control – Linear Motion – Available off-the-shelf, cylindrical, self lubricating, sintered bronze bearings from LM76 feature: Very high precision (e.g +2μ to +12μ for 2mm ID bearings), high load capacity (100kg/sq cm), high speed 30,000 rpm) and rapid oscillation capabilities, low/high temperature (-60OC to +230OC), very […]

Motion Control – Linear Focus Actuator from Equipment Solutions Features 200 Nano Meters Repeatability!

  Forestville, CA, – — Motion Control – This LFA-0604 Linear Focus Actuator: Flexure guidance system, 6 millimeter clear aperture, 4 millimeters of linear motion, 90 G’s acceleration (no load), 200 nanometers positioning repeatability, non-contact electro-optic position sensor, direct SCA814 Servo Controlled Amplifier compatibility, 38mm x 24mm, 80 grams

Motion Control – High Precision, High Load Goniometer Stages with +/- 30 Degrees of Travel Are Available from OES!

Motion Control – Goniometer Stages   Van Nuys, CA – – Motion Control – Optimal Engineering Systems, Inc. (OES) has added four goniometers to their expanding catalog of high precision positioning stages. The new, AK160-30 Goniometer Series feature precision ground worm gears with a 400:1 ratio and pre-loaded cross roller guides offer +/- 30 degrees […]

Powered by WordPress and ThemeMag