Motion Control – Three-Axis Stage! Motion Control – Four high resolution, high Load, high stability three axis gimbal mounts have been released by OES (Optimal Engineering Systems, Inc.). These four new AU270-YPR Three Axis (Yaw, Angular Pitch, and Roll) Gimbal Mounts were developed to be used with larger and heavier: Cameras, telescopes, directional antennas, optics, […]
Archive for the ‘Sub-micron’ Category
Motion Control – New! Three-axis Gimbal Mounts Feature High Resolution, High Load Capacity, Stability, and Four Motor Options!
February 25th, 2025
Editor/Publisher Motion Control – Rotational Voice Coil Stage Offers Galvo Like Performance at a Fraction of the Size and Cost!
January 20th, 2025
Editor/Publisher Motion Control – Rotational Scanner The Motion Control RVC-9025 Rotational Voice Coil Stage provides a means to quickly and repeatably steer an optical beam with a diameter of up to 25 millimeters over 90° with 25 microradians of resolution. Forestville, CA, — The motion control RVC-9025 provides galvo like performance at a fraction of the […]
Motion Control – NEW! YouTube Channel features High Precision Stages from Optimal Engineering Systems!
January 13th, 2025
Editor/Publisher Motion Control – OES YouTube Channel! Van Nuys, CA —– Motion Control – Optimal Engineering Systems, Inc. (OES) has unveiled their new YouTube Channel https://www.youtube.com/@oesmotioncontrolvideos. Checkout their new video featuring the AK110-10-15 Alpha-Beta Dual axis Goniometer Stage.
Motion Control – High Performance Ultra Compact Stepper Motor Positioning Stage From Equipment Solutions!
December 10th, 2024
Editor/Publisher Motion Control – Miniature Stepper Motor Stage Forestville, CA, – — The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor provides a […]
Motion Control – High Precision Three-axis Stages Adds A New Dimension to Pitch and Roll Stages … … Lift!
December 3rd, 2024
Editor/Publisher Motion Control – ZGG Stage – Lift Plus Dual Goniometers Van Nuys, CA – Motion Control – New High Precision Three-axis ZGG-60-10-15 Series of Lift, Pitch, and Roll Stages have been released by Optimal Engineering Systems, Inc. (OES). These compact motion control stages feature 60 mm +/- 2 mm (2.362 in. +/- 0.078 in.) of […]
Motion Control – Sub-micron Z-Axis Positioning Stages with Four Motor Options Introduced by OES!
October 22nd, 2024
Editor/Publisher Motion Control – Z-axis Stages Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) has added vertical stages to their extensive line of high accuracy, high resolution lift stages.
Motion Control Homepage – High Precision Linear, Pitch, Roll, and Yaw Positioning Stages Feature Four Motor Options!
September 10th, 2024
Editor/Publisher The Motion Control Homepage Spotlights – Four-axes Linear, Pitch, Roll, and Roll Stages Watch on YouTube– https://youtu.be/2ymH0TjI3Vc Van Nuys, CA – Motion Control – The new Motion Control XGGR-50-10-15-60 Series of Four-axis Linear, Pitch, Roll, and Yaw Stages from OES (Optimal Engineering Systems, Inc.) is the integration of a Linear-axis stage, […]
Motion Control – High Precision Linear Focus Actuator, the LFA-2014 from Equipment Solutions Features 200 Nanometer Positioning Repeatability!
August 6th, 2024
Editor/Publisher Motion Control – Linear Focus Actuator Forestville, CA, – — The motion control – LFA-2014 Linear Focus Actuator has a 20 millimeter clear aperture, 14 millimeters of linear motion, 200 nanometer positioning repeatability, non-contact electro-optic analog position sensor, fully integrated SCA814 Servo Amplifier, integrated heat sink, motor coil temperature sensor, and integrated […]
Motion Control – New! Large Three-axis Gimbal Mounts Feature High Resolution, and Four Motor Options
July 30th, 2024
Editor/Publisher Motion Control – Solenoid Drivers Van Nuys, CA – Motion Control – Designed for larger cameras, tracking devices, telescopes, optics, and other devices, four new, high resolution, three axis gimbal mounts have been released by OES (Optimal Engineering Systems, Inc.). This new series of Three Axis Gimbal Mounts are 588 mm wide […]
Innovations in Motion Control – XY-Theta Alignment Stages Feature: Sub Micron Resolution!
June 18th, 2024
Editor/Publisher Innovations in Motion Control – XY-Theta Alignment Stages! Van Nuys, CA – — Innovations in Motion Control Technology – Two new XY-Theta Alignment Stages have been released by Optimal Engineering Systems, Inc. (OES). The XYR-15-60-01 and the XYR-15-60-04 Alignment Stages feature 15 mm (0.58 in.) of travel in both the X and […]
Motion Control – Eight New High Resolution, High Repeatability Yaw-and-Pitch Stages for the Measurement of Angles and Curvatures!
May 7th, 2024
Editor/Publisher Motion Control – Yaw and Pitch Stages Van Nuys, CA – Motion Control – Eight new Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). These new series of high precision Yaw-and-Pitch Stages integrate Goniometers as the lower stage (yaw axis) and a rotary stage as the upper stage (pitch axis). The […]
Motion Control – Low Cost, High Precision Vertical Lift Stage from OES!
January 23rd, 2024
Editor/Publisher Motion Control – Vertical Lift Stage Van Nuys, CA – — Motion Control – The AT10-120 Motorized Vertical Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, low profile, high load vertical lift stage that can be easily integrated into almost any application. The large 220 mm x 140 mm (8.7 in. 5.5 […]
Motion Control – Linear Focus Actuator from Equipment Solutions Features 200 Nano Meters Repeatability!
January 2nd, 2024
Editor/Publisher Forestville, CA, – — Motion Control – This LFA-0604 Linear Focus Actuator: Flexure guidance system, 6 millimeter clear aperture, 4 millimeters of linear motion, 90 G’s acceleration (no load), 200 nanometers positioning repeatability, non-contact electro-optic position sensor, direct SCA814 Servo Controlled Amplifier compatibility, 38mm x 24mm, 80 grams
Motion Control – High Speed, High Force, Sub-micron Positioning, Voice Coil Stage Features 20 mm Aperture!
November 10th, 2023
Editor/Publisher Motion Control – Sub-micron Position Stage Forestville, CA, — — Motion Control – High speed, high force, sub-micron, >300 nanometer (1.1811 10-6 in.) positioning resolution, cross roller voice coil stages are self-contained, compact, and can be mounted in a horizontal or vertical axis. The high speed, 20 mm (0.7874 in.) travel, Equipment Solutions’ Motion Control […]
Motion Control – Three-Axis Yaw, Pitch, and Roll Positioning Stages Feature Four Motor Options!
November 7th, 2023
Editor/Publisher Motion Control – Yaw Pitch and Roll Stage Van Nuys, CA – Motion Control – New compact three-axis, Yaw, Pitch, and Roll Stages from OES (Optimal Engineering Systems, Inc.) feature four motor options to meet the precision and speed of travel requirements of an application. The YPR-10-15-60 Series of Three-axis Yaw, Pitch, and Roll Stages […]
XYZ in Motion – Select from the Large Variety of Precision XYZ Axis Stages to Suit Your Specific Application from Optimal Engineering Systems, Inc. (OES)!
October 13th, 2023
Editor/Publisher XYZ in Motion – XYZ Axis Stages to Suit Specific Applications! Van Nuys, CA – — XYZ in Motion – OES (Optimal Engineering Systems) has introduced a series of high precision, low cost XYZ positioning stages that can be easily integrated into new and existing applications. They are offered in 5 travel lengths […]
XZG Stages – Build-to-Order High Precision XZG Positioning Stages (X-axis, Z-axis, and Goniometer) from OES!
September 18th, 2023
Editor/Publisher XZG Stages … X-axis, Z-axis, plus Goniometer Stages! Van Nuys, CA – –XZG Stages – An extensive series of XZG Positioning Stages (X-axis, Z-axis, and Goniometer) is the newest addition to the OES (Optimal Engineering Systems, Inc.) family of high precision motion control stages. Built to order, a user can select from any combination of […]
XY Positioning Stage – Open Aperture XY Alignment Stages Feature: 120 mm x 120 mm of Travel, and 1 Micron Repeatability!
August 1st, 2023
Editor/Publisher XY Positioning Stage – Open Aperture XY Alignment Stages Van Nuys, CA – XY Positioning Stage – Motion Control – Optimal Engineering Systems, Inc. (OES) has released four new high resolution, high repeatability XY Alignment Stages. The AU200-120×120 Alignment Stages feature 120 mm (4.724 in.) of travel in both the X and […]
Motion Control – Servo Controller for Non-commutated Devices, eg. voice coil motors, from Equipment Solutions!
July 20th, 2023
Editor/Publisher Motion Control – Servo Controller for Non-commutated Devices! Motion Control – SCA601 Linear Servo Controller: High Performance analog PID Servo Control law; Digital control of PID tuning parameters; Analog Position Sensor input; High current linear amplifier; RS232 interface; 76 x 76 x 25 Forestville, CA, – Motion Control — The SCA601 Linear Servo […]
Z Axis Positioning Stage- Features of 600 MM Vertical Lift Stage Include: Stability, High Loading, Low Cost, and 5 Micron Repeatability!
July 17th, 2023
Editor/Publisher Z Axis Positioning Stage- 600 MM Vertical Lift Stages Van Nuys, CA – Z Axis Positioning Stage – The new AT20-600 series of Motorized Vertical Lift Stages from Optimal Engineering Systems, Inc. (OES) features a vertical lift of 600 mm. The AT20-600-01 (pictured) is driven by a Two-Phase Stepper Motor features a […]





Posted in



