Motion Control – Z-axis Stages
Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) has added vertical stages to their extensive line of high accuracy, high resolution lift stages.
Motion Control – Sub-micron Z-Axis Positioning Stages with Four Motor Options Introduced by OES!
October 22nd, 2024 
Editor/Publisher Motion Control – Select from the S-70-300H Series of 3 Inch Dia. Push Type Solenoids to Meet the High Force Requirements of an Application!
October 15th, 2024 Editor/Publisher Motion Control – Push Type Solenoids
Motion Control – Van Nuys, CA – Solenoids – The S-70-300H Series of high force Push Type Tubular Solenoids has been released by Magnetic Sensor Systems (MSS). Ideal for strokes of up to 4.00 inches, this series of solenoids features 18 different solenoids to select from based on the Force, Voltage, Duty Cycle, and Stroke requirement of the user. MSS Solenoids coils typically utilize Class “F” 23 to 40 AWG (American Wire Gauge) windings with Class “A” lead wire insulation for better protection of the solenoid during longer duty cycles.
Motion Control – Maxon’s New ESCON2 DC controller elevates precision, speed, and torque management
October 8th, 2024 Editor/Publisher Innovations in Motion Control Products – Position & Speed Controllers
The new ESCON2 controller, for brushed DC and brushless DC motors up to 1,800W continuous duty, is designed for OEM integration into customer systems. ESCON2 enhances control with features including field-oriented control (FOC) and acceleration and velocity feed forward.
Motion Control – 12.7 mm (0.500 in.) Diameter Miniature Linear Voice Coil Servo Motors Have 25.4 mm (1.000 in.) of Travel!
October 1st, 2024 Editor/Publisher Motion Control – Long Stroke Miniature Voice Coil Motor!
Van Nuys, CA – Motion Control – Moticont is releasing two 12.7 mm (0.500 in.) diameter Linear Voice Coil Motors, the LVCM-013-032-02M (Metric) and the LVCM-013-032-02 (Imperial). These brushless high speed linear servo motors have a 25.4 mm 1.000 in. long stroke, and a high-force-to-size ratio of 0.70 N (2.5 oz.) and a peak force of 2.20 N (7.9 oz.) at 10% duty cycle.
Known also as moving coil motors or linear actuators they are ideal for: Dispensing, work holding and clamping, assembly, testing, wafer handling, animation, dynamic vibration absorption, scanners and laser beam steering and filtering.
Motion Control Products – RVC-1008 Miniature Rotational Voice Coil Stage from Equipment Solutions
September 17th, 2024 Editor/Publisher Motion Control Products – Miniature Rotational Voice Coil Stage
Forestville, CA, – Motion Control — The RVC-1008 Rotational Voice Coil Stage: Optical element widths up to 20mm; Controllable motion over +/-10 degree optical; Small step response of less than 3msec; Non-contact electro-optic position sensor; Positioning sensitivity of less than 2µrad; Analog and USB control of mirror position; Digital positioning resolution of 6µrad; Fully integrated PID servo controller; Simple USB electrical interface; Extremely compact design.
Motion Control Homepage – High Precision Linear, Pitch, Roll, and Yaw Positioning Stages Feature Four Motor Options!
September 10th, 2024 Editor/Publisher The Motion Control Homepage Spotlights –
Four-axes Linear, Pitch, Roll, and Roll Stages
Watch on YouTube– https://youtu.be/2ymH0TjI3Vc
Van Nuys, CA – Motion Control – The new Motion Control XGGR-50-10-15-60 Series of Four-axis Linear, Pitch, Roll, and Yaw Stages from OES (Optimal Engineering Systems, Inc.) is the integration of a Linear-axis stage, two Goniometer Stages, and a Rotary Stage. The lower Linear axis stage has 50 mm of travel.
Motion Control Homepage – Rotary Solenoids Matched to An Application Are Available in OEM Quantities!
September 3rd, 2024 Editor/Publisher Motion Control Homepage Spotlights –
Rotary Solenoids
Motion Control – Van Nuys, CA – The R-09-150 CWN Series of Clockwise, Reverse Shaft Extension Rotary Solenoids from Magnetic Sensor Systems (MSS), available in OEM quantities, features 18 different winding configurations allowing the user to match torque and duty cycle requirements to an application.
These compact 38.1 mm (1.50 in.) diameter motion control solenoids are just 22.1 mm (0.87 in.) long and have two M4X0.7 threaded studs (8-32 studs optional) 7.4 mm (0.29 in.) long on a 22.2 mm (0.875 in.) bolt circle. The reverse shaft has 40 degrees of clockwise rotation, extending 13.0 mm (0.51 in.). Shaft end is serrated for better grip of the attached load.
Motion Control – Select XTREME 6000, Full Ceramic Radial Bearings from CERAMICSPEED for Extreme Environment Applications!
August 13th, 2024 Editor/Publisher Motion Control – Full Ceramic Ball Radial Bearings
Motion Control – The XTREME 6000 ZrO2 Series of Full Ceramic Radial Bearings from CeramicSpeed are designed to provide levels of performance in extreme environments beyond the capabilities of steel and even hybrid bearings. The complementing components of these bearings were carefully selected to provide the highest levels of performance in high temperatures, and adverse environments such as: Submerged in water, high pressure steam, chemicals, and caustic fluids.
Motion Control – High Precision Linear Focus Actuator, the LFA-2014 from Equipment Solutions Features 200 Nanometer Positioning Repeatability!
August 6th, 2024 Editor/Publisher Motion Control – Linear Focus Actuator
Forestville, CA, – — The motion control – LFA-2014 Linear Focus Actuator has a 20 millimeter clear aperture, 14 millimeters of linear motion, 200 nanometer positioning repeatability, non-contact electro-optic analog position sensor, fully integrated SCA814 Servo Amplifier, integrated heat sink, motor coil temperature sensor, and integrated stage motion brake.
Motion Control – New! Large Three-axis Gimbal Mounts Feature High Resolution, and Four Motor Options
July 30th, 2024 Editor/Publisher Motion Control – Solenoid Drivers
Van Nuys, CA – Motion Control – Designed for larger cameras, tracking devices, telescopes, optics, and other devices, four new, high resolution, three axis gimbal mounts have been released by OES (Optimal Engineering Systems, Inc.). This new series of Three Axis Gimbal Mounts are 588 mm wide by 463 mm high, and handle loads up to 10 kg. The AU400-AER (Azimuth, Elevation, and Roll) Series of Three Axis Gimbal Mounts feature high precision 180:1 worm gear driven “V” groove rotary stages.
Motion Control – Miniature Voice Coil Motor Only 19.1 mm in Diameter Has 22.2 mm Stroke and High Force-to-Size Ratio!
July 9th, 2024 Editor/Publisher Motion Control – Miniature Voice Coil Motor!
Van Nuys, CA – Motion Control – The miniature hollow core HVCM-019-032-003-02 Voice Coil Motor, featuring a 3.2 mm open aperture and high force-to-size ratio has been introduced by Moticont. A true DC Servo Motor, it has a continuous force rating of 2.1 N (7.4 oz.) and a peak force of 6.5 N (23.3 oz) at a 10% duty cycle. This quiet, clean, non-commutated, miniature brushless servo motor features: Zero cogging and zero backlash when connected directly to a load, high acceleration, deceleration and high speed.
Motion Control – Companies on Facebook
July 1st, 2024 Editor/Publisher Motion Control – Facebook Pages – Companies
MotionShop.com invites you to check out these Company Facebook pages …
https://www.facebook.com/LM76Blogger/
https://www.facebook.com/OESMotionSystems/
https://www.facebook.com/Moticont/
https://www.facebook.com/electromateindustrial/
https://www.facebook.com/MagneticSensorSystems/
https://www.facebook.com/EquipmentSolutions.Blog/
Check out these other Motion Control Facebook Pages as well:
https://www.facebook.com/MotionControlHomepage/
https://www.facebook.com/InnovationsinMotionControl/
https://www.facebook.com/AllMotionBlog/
https://www.facebook.com/AutomationBlogger/
https://www.facebook.com/MotionControlBlogger/
https://www.facebook.com/MotionControlBuyersGuide/
https://www.facebook.com/MotionControlWeb/
https://www.facebook.com/MotionControlMktg/
https://www.facebook.com/XYZinMotion/
https://www.facebook.com/EquipmentSolutions.Blog/
https://www.facebook.com/LM76Blogger/
See these and other Motion Control Components featured on:
http://MotionControl-XYZ-Theta.com
http://LinearMotionBlogger.com
http://MotionControlBlogger.com
Motion Control – Dual Axis Cross Roller Bearing Voice Coil Stage Features 200 Nanometers Positioning Repeatability!
June 25th, 2024 Editor/Publisher Motion Control – Stage Features 200 Nanometers Repeatability!
Forestville, CA, – — The motion control – VCS-XY1010 Dual Axis Voice Coil Stage: Cross roller bearing guidance system; Reaction force cancellation system; 10mm of linear motion each axis; 35 G’s acceleration, no load; 200 nanometers positioning repeatability; Non-contact electro-optic position sensor; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 251 x 254mm, 1120 grams.
Innovations in Motion Control – XY-Theta Alignment Stages Feature: Sub Micron Resolution!
June 18th, 2024 Editor/Publisher Innovations in Motion Control –
XY-Theta Alignment Stages!
Van Nuys, CA – — Innovations in Motion Control Technology – Two new XY-Theta Alignment Stages have been released by Optimal Engineering Systems, Inc. (OES). The XYR-15-60-01 and the XYR-15-60-04 Alignment Stages feature 15 mm (0.58 in.) of travel in both the X and Y axes and 360 degrees of continuous rotation on the rotary axis. The new XY-Theta Alignment Stages are driven by Two Phase Stepper Motors featuring 0.25 micron resolution (20 Micro-steps per Step Motor Driver in use).
Motion Control – The S-63-38 Series of 0.38 Inch Dia. Pull Type Solenoids Features 16 Standard models to Meet Voltage, Duty Cycle, Force, and Stroke Requirements of an Application!
June 11th, 2024 Editor/Publisher Motion Control Technology Newsletter – Tubular Solenoids
Motion Control Technology – Van Nuys, CA – The S-63-38 Series of Pull Type Tubular Solenoids has been released by Magnetic Sensor Systems (MSS). This series of 0.38 in. diameter solenoids features 16 standard off-the-shelf solenoids to select from based on the Voltage, Duty Cycle, Force and Stroke requirement of the user.
These miniature solenoids featuring a 0.38 in. diameter have a 0.66 in. long housing and when retracted are just 0.80 in. long.
Motion Control – AMC Introduces the FE060-25-IPM FlexPro® Servo Drive with IMPACT™ Architecture
June 4th, 2024 Editor/Publisher Motion Control – Servo Drive
Motion Control – ADVANCED MOTION CONTROL AND POWER ALL IN ONE COMPACT PACKAGE
Vaughan, Ontario, Canada — Motion Control – Advanced Motion Controls (AMC), a US leading provider of servo amplifiers, is proud to announce the release of the FE060-25-IPM FlexPro® series servo drive. This state-of-the-art drive is designed to provide advanced control and power in one compact package, making it the perfect choice for a wide range of industrial and commercial applications.
Motion Control – Miniature PVS 30.5 Parallelogram Voice Coil Stage from Equipment Solutions!
May 14th, 2024 Editor/Publisher Motion Control – Miniature Parallelogram Voice Coil Stage!
Forestville, CA, – — Motion Control – This Custom PVS-30.5 Parallelogram Voice Coil Stage Features: Flexure guidance system, 30 millimeter clear aperture, 4 millimeters of linear motion, 45 G’s acceleration (no load), 200 nanometers positioning repeatability, non-contact electro-optic position sensor, direct SCA-814 Servo Controlled Amplifier compatibility, 38mm x 46mm x 85mm, 280 grams.
Motion Control – Eight New High Resolution, High Repeatability Yaw-and-Pitch Stages for the Measurement of Angles and Curvatures!
May 7th, 2024 Editor/Publisher Motion Control – Yaw and Pitch Stages
Van Nuys, CA – Motion Control – Eight new Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). These new series of high precision Yaw-and-Pitch Stages integrate Goniometers as the lower stage (yaw axis) and a rotary stage as the upper stage (pitch axis). The yaw range of travel is +/-10 or +/- 15 degrees. The pitch range of travel is 360 degrees of continuous motion. The diameter of the pitch axis is 60 mm.
Applications include Laser scanning, drilling, and machining, reverse engineering, inspection, assembly, measurements, tracking, and positioning.
Motion Control – Meet the Voltage, Duty Cycle, and Force Requirements of Many Applications with a Series of 18 Push Type Open Frame Solenoids with a 1 Inch Stroke!
April 30th, 2024 Editor/Publisher Motion Control – Push Type Open Frame Solenoid
Motion Control Solenoids – Van Nuys, CA — Push Type Solenoids from Magnetic Sensor Systems (MSS) includes a series of 18 different low-cost open frame solenoids to select from based on the Voltage, Duty Cycle, Force of up to 96 oz (26.7 N) and stroke requirements of the user. These clean, high efficiency, low-cost S-18-100-QH Open Frame Push Type Solenoids can be operated at a variety of duty cycles (voltage dependent) and are the ideal choice for: Medical dispensing, mixing, valve control, disconnects, vending machines, farm machinery, transmission shifting, fire suppression systems, cabinet locks, door controls, assembly and sorting equipment.
Motion Control – Exor Introduces Next Generation Wireless HMI: Exor X5
April 23rd, 2024 Editor/Publisher Motion Control – Wireless HMI!
Vaughan, Ontario, Canada — Motion Control Components — Exor, a leading provider of industrial automation solutions, is proud to announce the release of its latest product, the Exor X5 Wireless HMI. This cutting-edge device is designed to revolutionize the way industrial operators interact with their machines and equipment.
