September 10th, 2024 
Editor/Publisher 
Watch on YouTube– https://youtu.be/2ymH0TjI3Vc
Van Nuys, CA – Motion Control – The new Motion Control XGGR-50-10-15-60 Series of Four-axis Linear, Pitch, Roll, and Yaw Stages from OES (Optimal Engineering Systems, Inc.) is the integration of a Linear-axis stage, two Goniometer Stages, and a Rotary Stage. The lower Linear axis stage has 50 mm of travel.
August 13th, 2024 Editor/Publisher 
Motion Control – The XTREME 6000 ZrO2 Series of Full Ceramic Radial Bearings from CeramicSpeed are designed to provide levels of performance in extreme environments beyond the capabilities of steel and even hybrid bearings. The complementing components of these bearings were carefully selected to provide the highest levels of performance in high temperatures, and adverse environments such as: Submerged in water, high pressure steam, chemicals, and caustic fluids.
August 6th, 2024 Editor/Publisher 
Forestville, CA, – — The motion control – LFA-2014 Linear Focus Actuator has a 20 millimeter clear aperture, 14 millimeters of linear motion, 200 nanometer positioning repeatability, non-contact electro-optic analog position sensor, fully integrated SCA814 Servo Amplifier, integrated heat sink, motor coil temperature sensor, and integrated stage motion brake.
July 30th, 2024 Editor/Publisher 
Van Nuys, CA – Motion Control – Designed for larger cameras, tracking devices, telescopes, optics, and other devices, four new, high resolution, three axis gimbal mounts have been released by OES (Optimal Engineering Systems, Inc.). This new series of Three Axis Gimbal Mounts are 588 mm wide by 463 mm high, and handle loads up to 10 kg. The AU400-AER (Azimuth, Elevation, and Roll) Series of Three Axis Gimbal Mounts feature high precision 180:1 worm gear driven “V” groove rotary stages.
July 9th, 2024 Editor/Publisher 
Van Nuys, CA – Motion Control – The miniature hollow core HVCM-019-032-003-02 Voice Coil Motor, featuring a 3.2 mm open aperture and high force-to-size ratio has been introduced by Moticont. A true DC Servo Motor, it has a continuous force rating of 2.1 N (7.4 oz.) and a peak force of 6.5 N (23.3 oz) at a 10% duty cycle. This quiet, clean, non-commutated, miniature brushless servo motor features: Zero cogging and zero backlash when connected directly to a load, high acceleration, deceleration and high speed.
July 1st, 2024 Editor/Publisher 
https://www.facebook.com/LM76Blogger/
https://www.facebook.com/OESMotionSystems/
https://www.facebook.com/Moticont/
https://www.facebook.com/electromateindustrial/
https://www.facebook.com/MagneticSensorSystems/
https://www.facebook.com/EquipmentSolutions.Blog/
https://www.facebook.com/MotionControlHomepage/
https://www.facebook.com/InnovationsinMotionControl/
https://www.facebook.com/AllMotionBlog/
https://www.facebook.com/AutomationBlogger/
https://www.facebook.com/MotionControlBlogger/
https://www.facebook.com/MotionControlBuyersGuide/
https://www.facebook.com/MotionControlWeb/
https://www.facebook.com/MotionControlMktg/
https://www.facebook.com/XYZinMotion/
https://www.facebook.com/EquipmentSolutions.Blog/
https://www.facebook.com/LM76Blogger/
See these and other Motion Control Components featured on:
http://MotionControl-XYZ-Theta.com
http://LinearMotionBlogger.com
http://MotionControlBlogger.com
June 25th, 2024 Editor/Publisher 
Forestville, CA, – — The motion control – VCS-XY1010 Dual Axis Voice Coil Stage: Cross roller bearing guidance system; Reaction force cancellation system; 10mm of linear motion each axis; 35 G’s acceleration, no load; 200 nanometers positioning repeatability; Non-contact electro-optic position sensor; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 251 x 254mm, 1120 grams.
June 18th, 2024 Editor/Publisher 
Van Nuys, CA – — Innovations in Motion Control Technology – Two new XY-Theta Alignment Stages have been released by Optimal Engineering Systems, Inc. (OES). The XYR-15-60-01 and the XYR-15-60-04 Alignment Stages feature 15 mm (0.58 in.) of travel in both the X and Y axes and 360 degrees of continuous rotation on the rotary axis. The new XY-Theta Alignment Stages are driven by Two Phase Stepper Motors featuring 0.25 micron resolution (20 Micro-steps per Step Motor Driver in use).
June 4th, 2024 Editor/Publisher 
Motion Control – ADVANCED MOTION CONTROL AND POWER ALL IN ONE COMPACT PACKAGE
Vaughan, Ontario, Canada — Motion Control – Advanced Motion Controls (AMC), a US leading provider of servo amplifiers, is proud to announce the release of the FE060-25-IPM FlexPro® series servo drive. This state-of-the-art drive is designed to provide advanced control and power in one compact package, making it the perfect choice for a wide range of industrial and commercial applications.
May 14th, 2024 Editor/Publisher 
Forestville, CA, – — Motion Control – This Custom PVS-30.5 Parallelogram Voice Coil Stage Features: Flexure guidance system, 30 millimeter clear aperture, 4 millimeters of linear motion, 45 G’s acceleration (no load), 200 nanometers positioning repeatability, non-contact electro-optic position sensor, direct SCA-814 Servo Controlled Amplifier compatibility, 38mm x 46mm x 85mm, 280 grams.
April 16th, 2024 Editor/Publisher 
April 9th, 2024 Editor/Publisher 
Van Nuys, CA – Motion Control – A New, compact, Electric Cylinder or Linear Voice Coil Actuator 38.1 mm (1.500 in.) in diameter, with a 12.7 mm (0.500 in.) stroke, and a housing length of 69.9 mm (2.750 in.) long has been released by Moticont.
This new SDLM-0038-070-01-01M Linear DC Actuator features high repeatability, 1.25 micron resolution, a continuous force of 14.5 N (3.2 lbs.), and a peak force of 45.8 N (10.3 lbs.). To operate at peak efficiency an integral temperature sensor provides data to achieve the highest possible throughput.
April 2nd, 2024 Editor/Publisher 
E. Longmeadow, MA – Motion Control – Linear Motion – Pegasus Hybrid Linear Bearings for the times Bearing Failure just can not be allowed to Happen! That is the the time when Down-Time is more costly then the price of the bearings.
March 26th, 2024 Editor/Publisher 
Forestville, CA, – — Motion Control – This Custom LFA-2003 Linear Focus Actuator Features: 20 millimeter clear aperture, 3 millimeters linear motion, 200 nanometer position repeatability, Flexture guidance system, ‘C’ mount lens adapter, integrated coil temperature sensor, direct SCA814 Servo Controlled Amplifier compatibility, 74mm x 61mm, 690 grams.
March 18th, 2024 Editor/Publisher 
Van Nuys, CA – Motion Control – Complementing the OES (Optimal Engineering Systems Inc.) growing line of single and multi-axis positioning stages is the Allegra Series of Stored Program Motion Control Systems Controllers. The Allegra Series of Controllers is available as a desktop (pictured) or 19 inch rack mount system.
March 11th, 2024 Editor/Publisher 
A Solenoid is a long wire, wound with a helical pattern, usually surrounded by a steel frame, having a steel core inside the winding.
When carrying a current “i “, the Solenoid becomes an electro-mechanical device, in which electrical energy is converted into mechanical work.
February 26th, 2024 Editor/Publisher 
E. Longmeadow, MA –Motion Control Products- CERAMICSPEED Hybrid Radial Corrotec/CorroCoat Bearings are designed for environments of high humidity, have been approved in accordance with FDA 21 CFR (Code of Federal Regulation covering medicine and food), and have an EC No. 1935/2004 authorization. Superior life and performance when compared to bearings made from just stainless steel, Corrotec/CorroCoat Bearings feature Stainless Steel races with CorroCoat, a coating with extremely high corrosion resistance and friction suppressant properties, hard, very smooth ceramic balls that will not deform or spall under high loads, and synthetic material ball cages.
February 16th, 2024 Editor/Publisher 
Van Nuys, CA – — Motion Control – A series of long travel, low cost, low profile, motorized, profile rail positioning stages are now available from Optimal Engineering Systems, Inc. (OES). The AQ140 Series of linear stages are available off-the-shelf in travel lengths of: 600 mm, 700 mm, 800 mm, 900 mm, and 1000 mm. These high precision stages can be ordered with a Two-Phase Stepper Motor (pictured) which feature resolutions of 2 micron and 1.25 micron (achieved with a 10 or 20 micro-steps per step stepper motor driver), and up to 80 mm per sec of travel.
February 6th, 2024 Editor/Publisher 
Vaughan, Ontario, Canada — Motion Control – The FlexPro® drive series is AMC’s latest family of digital servo drives designed for high power, small size, and reliable servo motor control. The drive architecture allows for higher power densities while still maintaining reliability and versatility. The advanced processing and storage capabilities ensure that the drives are more intelligent and operationally flexible than ever before
January 30th, 2024 Editor/Publisher 
