Innovations in Motion Control Products – Position & Speed Controllers The new ESCON2 controller, for brushed DC and brushless DC motors up to 1,800W continuous duty, is designed for OEM integration into customer systems. ESCON2 enhances control with features including field-oriented control (FOC) and acceleration and velocity feed forward.
Archive for the ‘Motion Control Products – Electrical’ Category
Motion Control – Maxon’s New ESCON2 DC controller elevates precision, speed, and torque management
October 8th, 2024
Editor/Publisher Motion Control – 12.7 mm (0.500 in.) Diameter Miniature Linear Voice Coil Servo Motors Have 25.4 mm (1.000 in.) of Travel!
October 1st, 2024
Editor/Publisher Motion Control – Long Stroke Miniature Voice Coil Motor! Van Nuys, CA – Motion Control – Moticont is releasing two 12.7 mm (0.500 in.) diameter Linear Voice Coil Motors, the LVCM-013-032-02M (Metric) and the LVCM-013-032-02 (Imperial). These brushless high speed linear servo motors have a 25.4 mm 1.000 in. long stroke, and a high-force-to-size ratio […]
Motion Control Products – RVC-1008 Miniature Rotational Voice Coil Stage from Equipment Solutions
September 17th, 2024
Editor/Publisher Motion Control Products – Miniature Rotational Voice Coil Stage Forestville, CA, – Motion Control — The RVC-1008 Rotational Voice Coil Stage: Optical element widths up to 20mm; Controllable motion over +/-10 degree optical; Small step response of less than 3msec; Non-contact electro-optic position sensor; Positioning sensitivity of less than 2µrad; Analog and USB control of […]
Motion Control Homepage – High Precision Linear, Pitch, Roll, and Yaw Positioning Stages Feature Four Motor Options!
September 10th, 2024
Editor/Publisher The Motion Control Homepage Spotlights – Four-axes Linear, Pitch, Roll, and Roll Stages Watch on YouTube– https://youtu.be/2ymH0TjI3Vc Van Nuys, CA – Motion Control – The new Motion Control XGGR-50-10-15-60 Series of Four-axis Linear, Pitch, Roll, and Yaw Stages from OES (Optimal Engineering Systems, Inc.) is the integration of a Linear-axis stage, […]
Motion Control Homepage – Rotary Solenoids Matched to An Application Are Available in OEM Quantities!
September 3rd, 2024
Editor/Publisher Motion Control Homepage Spotlights – Rotary Solenoids Motion Control – Van Nuys, CA – The R-09-150 CWN Series of Clockwise, Reverse Shaft Extension Rotary Solenoids from Magnetic Sensor Systems (MSS), available in OEM quantities, features 18 different winding configurations allowing the user to match torque and duty cycle requirements to an application. These compact 38.1 […]
Motion Control – High Precision Linear Focus Actuator, the LFA-2014 from Equipment Solutions Features 200 Nanometer Positioning Repeatability!
August 6th, 2024
Editor/Publisher Motion Control – Linear Focus Actuator Forestville, CA, – — The motion control – LFA-2014 Linear Focus Actuator has a 20 millimeter clear aperture, 14 millimeters of linear motion, 200 nanometer positioning repeatability, non-contact electro-optic analog position sensor, fully integrated SCA814 Servo Amplifier, integrated heat sink, motor coil temperature sensor, and integrated […]
Motion Control – New! Large Three-axis Gimbal Mounts Feature High Resolution, and Four Motor Options
July 30th, 2024
Editor/Publisher Motion Control – Solenoid Drivers Van Nuys, CA – Motion Control – Designed for larger cameras, tracking devices, telescopes, optics, and other devices, four new, high resolution, three axis gimbal mounts have been released by OES (Optimal Engineering Systems, Inc.). This new series of Three Axis Gimbal Mounts are 588 mm wide […]
Motion Control – Select from a Series of Compact Electromagnets to Meet Holding Force and Duty Cycle Requirements of an Application!
July 23rd, 2024
Editor/Publisher Motion Control – Electromagnets Motion Control – Van Nuys, CA – A powerful series of compact, low cost electromagnets has been released by Magnetic Sensor Systems (MSS). Their E-22-150 Series of Motion Control Tubular Electromagnets 1.5 in. in diameter x 2.15 in. feature 19 different windings to select from based on the duty cycle and […]
Motion Control – Miniature Voice Coil Motor Only 19.1 mm in Diameter Has 22.2 mm Stroke and High Force-to-Size Ratio!
July 9th, 2024
Editor/Publisher Motion Control – Miniature Voice Coil Motor! Van Nuys, CA – Motion Control – The miniature hollow core HVCM-019-032-003-02 Voice Coil Motor, featuring a 3.2 mm open aperture and high force-to-size ratio has been introduced by Moticont. A true DC Servo Motor, it has a continuous force rating of 2.1 N (7.4 oz.) and […]
Motion Control – Companies on Facebook
July 1st, 2024
Editor/Publisher Motion Control – Facebook Pages – Companies MotionShop.com invites you to check out these Company Facebook pages … https://www.facebook.com/LM76Blogger/ https://www.facebook.com/OESMotionSystems/ https://www.facebook.com/Moticont/ https://www.facebook.com/electromateindustrial/ https://www.facebook.com/MagneticSensorSystems/ https://www.facebook.com/EquipmentSolutions.Blog/ Check out these other Motion Control Facebook Pages as well: https://www.facebook.com/MotionControlHomepage/ https://www.facebook.com/InnovationsinMotionControl/ https://www.facebook.com/AllMotionBlog/ https://www.facebook.com/AutomationBlogger/ https://www.facebook.com/MotionControlBlogger/ https://www.facebook.com/MotionControlBuyersGuide/ https://www.facebook.com/MotionControlWeb/ https://www.facebook.com/MotionControlMktg/ https://www.facebook.com/XYZinMotion/ https://www.facebook.com/EquipmentSolutions.Blog/ https://www.facebook.com/LM76Blogger/ See these and other Motion Control Components featured on: http://MotionShop.com.com […]
Motion Control – Dual Axis Cross Roller Bearing Voice Coil Stage Features 200 Nanometers Positioning Repeatability!
June 25th, 2024
Editor/Publisher Motion Control – Stage Features 200 Nanometers Repeatability! Forestville, CA, – — The motion control – VCS-XY1010 Dual Axis Voice Coil Stage: Cross roller bearing guidance system; Reaction force cancellation system; 10mm of linear motion each axis; 35 G’s acceleration, no load; 200 nanometers positioning repeatability; Non-contact electro-optic position sensor; Direct SCA814 Servo […]
Innovations in Motion Control – XY-Theta Alignment Stages Feature: Sub Micron Resolution!
June 18th, 2024
Editor/Publisher Innovations in Motion Control – XY-Theta Alignment Stages! Van Nuys, CA – — Innovations in Motion Control Technology – Two new XY-Theta Alignment Stages have been released by Optimal Engineering Systems, Inc. (OES). The XYR-15-60-01 and the XYR-15-60-04 Alignment Stages feature 15 mm (0.58 in.) of travel in both the X and […]
Motion Control – The S-63-38 Series of 0.38 Inch Dia. Pull Type Solenoids Features 16 Standard models to Meet Voltage, Duty Cycle, Force, and Stroke Requirements of an Application!
June 11th, 2024
Editor/Publisher Motion Control Technology Newsletter – Tubular Solenoids Motion Control Technology – Van Nuys, CA – The S-63-38 Series of Pull Type Tubular Solenoids has been released by Magnetic Sensor Systems (MSS). This series of 0.38 in. diameter solenoids features 16 standard off-the-shelf solenoids to select from based on the Voltage, Duty Cycle, Force and Stroke […]
Motion Control – AMC Introduces the FE060-25-IPM FlexPro® Servo Drive with IMPACT™ Architecture
June 4th, 2024
Editor/Publisher Motion Control – Servo Drive Motion Control – ADVANCED MOTION CONTROL AND POWER ALL IN ONE COMPACT PACKAGE Vaughan, Ontario, Canada — Motion Control – Advanced Motion Controls (AMC), a US leading provider of servo amplifiers, is proud to announce the release of the FE060-25-IPM FlexPro® series servo drive. This state-of-the-art drive […]
Motion Control – Meet the Voltage, Duty Cycle, and Force Requirements of Many Applications with a Series of 18 Push Type Open Frame Solenoids with a 1 Inch Stroke!
April 30th, 2024
Editor/Publisher Motion Control – Push Type Open Frame Solenoid Motion Control Solenoids – Van Nuys, CA — Push Type Solenoids from Magnetic Sensor Systems (MSS) includes a series of 18 different low-cost open frame solenoids to select from based on the Voltage, Duty Cycle, Force of up to 96 oz (26.7 N) and stroke requirements of […]
Motion Control – Exor Introduces Next Generation Wireless HMI: Exor X5
April 23rd, 2024
Editor/Publisher Motion Control – Wireless HMI! Vaughan, Ontario, Canada — Motion Control Components — Exor, a leading provider of industrial automation solutions, is proud to announce the release of its latest product, the Exor X5 Wireless HMI. This cutting-edge device is designed to revolutionize the way industrial operators interact with their machines and […]
Motion Control Products Featured on Facebook
April 16th, 2024
Editor/Publisher Motion Control – Facebook Pages MotionShop.com invites you to check out these Facebook pages …
Motion Control – Compact 1.25 Micron Resolution Direct Drive Linear Actuator Features High Speed, Zero Cogging!
April 9th, 2024
Editor/Publisher Motion Control Stage- Hollow Core Voice Coil Stage Van Nuys, CA – Motion Control – A New, compact, Electric Cylinder or Linear Voice Coil Actuator 38.1 mm (1.500 in.) in diameter, with a 12.7 mm (0.500 in.) stroke, and a housing length of 69.9 mm (2.750 in.) long has been released by Moticont. This […]
Motion Control – Motion Controllers for 1, 2, 3, and 4 Axis of Motion Can Be Operated as Stand-alone or Can Be Host Controlled!
March 18th, 2024
Editor/Publisher Motion Control – Multi-axis Motion Controllers Van Nuys, CA – Motion Control – Complementing the OES (Optimal Engineering Systems Inc.) growing line of single and multi-axis positioning stages is the Allegra Series of Stored Program Motion Control Systems Controllers. The Allegra Series of Controllers is available as a desktop (pictured) or 19 inch rack mount […]
Motion Control – Tutorial – Solenoid Construction
March 11th, 2024
Editor/Publisher Motion Control – Tutorial – Solenoid Construction Solenoid Construction A Solenoid is a long wire, wound with a helical pattern, usually surrounded by a steel frame, having a steel core inside the winding. When carrying a current “i “, the Solenoid becomes an electro-mechanical device, in which electrical energy is converted into mechanical work.





Posted in



