Motion Control – XZ-Axis  Positioning Stages

Van Nuys, CA – — Motion Control – OES (Optimal Engineering Systems) has added a new series of 15 mm, 30 mm, 50 mm, and 75 mm Linear Motion Positioning Stages to their broad selection of precision motion control components. Each of these motorized XZ-Axis Linear Positioning Stages features 1 micron repeatability and 10 micron positional accuracy. Both the X-axis (horizontal axis) and the Z-axis (vertical axis) have the travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm and even longer to meet your application requirements.

Motion Control – Harmonic Drive  Servo Actuator

Vaughan, Ontario, Canada — Motion Control – Components — Introducing Dual Absolute encoder versions of the FHA-C mini actuator. Featuring BiSS-C Harmonic Drive fha-24v-002bi-directional communication for both encoders. The dual encoders are incorporated in essentially the same package size as the long-standing FHA-C mini single incremental encoder version. Without increasing the size, the dual absolute encoder offers single turn absolute position at the output, without the need for battery back-up. Panel mount connectors come standard, and customers can choose between 4 exit options.

Motion Control – Direct Drive Linear Motors

Van Nuys, CA – Motion Control – The new, SDLM-025-070-01-01 direct drive linear motor from Moticont, also known as an electric cylinder, features a built-in encoder, has zero backlash, zero cogging, and provides users with high acceleration, high speed, high resolution, and long life.  This direct drive linear motor features 1.25 µm (0.000049 in.) in of resolution.

Motion Control – Pick & Hold Solenoids

Van Nuys, CA – — Motion Control – A compact, PWM, high performance Pick-and-Hold Solenoid Driver Module, the PH-ET series from Optimal Engineering Systems, Inc. (OES) is designed to energize one or two solenoids independently. It avoids overheating of the energized solenoid coils even for indefinite hold times.

Motion Control – New Single Axis Motion Controller!

 This 1-axis motion controller features Ethernet/RS232 communication and an optional 800W Servo Drive

Vaughan, Ontario, Canada — Motion Control -The DMC-3x01x Motion Controller Series is Galil’s latest generation single-axis motion controller. It uses a 32-bit RISC processor to provide higher speed than older models.  Like all Galil controllers, programming the DMC-3x01x is simplified with two-letter, intuitive commands and a full set of software tools for servo tuning and analysis. The DMC-3x01x Motion Controller Series feature:

• Available as a compact card-level or box-level unit
• Connects to a stepper or servo motor amplifier of any power range
• Can be purchased with an internal 800-Watt brushless sine drive   or microstepping drive which minimizes space, cost, and wiring
• Operates stand-alone or can be networked to a PC via Ethernet
• Modes of motion include point-to-point positioning, position tracking, jogging, contouring, electronic gearing and ecam.

Features include:

• Two daisy-chainable Ethernet 100 Base-T ports. One 115kbaud RS232 port
• Ethernet supports multiple masters and slaves. TCP/IP, UDP and Modbus TCP master protocol for communication with I/O devices
• Encoder feedback up to 15 MHz. Quadrature standard. SSI and BiSS encoder option(SER). Sinusoidal Encoder option (DMC-31xxx). Main and auxiliary encoder inputs
• Non-volatile memory for programs, variables, and arrays.
• Concurrent execution of four programs.
• Optically isolated forward and reverse limit inputs and homing inputs
• 8 uncommitted, isolated inputs and 4 isolated outputs
• High speed position latch and output compare
• 2 uncommitted 12bit 0-5V analog inputs (16bit ±10V inputs on DMC-31xxx) and 1 uncommitted analog output
• Standard power input is +/-12V and 5V. Controller available with optional DC-DC converter with 9-48VDC single supply input. (Option for 20-80 VDC).

For more information, visit Galil Ethernet/RS232 Single Axis Motion Controller.

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

For more information on the “Innovation and Technology Award”

CLICK HERE!

For more information on the “2021 Excellence Award”

CLICK HERE!

For more information on the “Best Place to Work” CLICK HERE!

For more information on the “AHTD Award” CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://LinearMotionBlogger.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

Motion Control – Yaw-Pitch-Roll Stages

Van Nuys, CA – Motion Control – Three new high accuracy Yaw-Pitch-Roll stages have been introduced by OES (Optimal Engineering Systems, Inc.), the YPR100-10-15-01 (stepper motor driven – pictured), the YPR100-10-15-02 (brushless servo motor driven) and the YPR100-10-15-03 (DC servo motor driven). These Yaw-Pitch-Roll stages are ideal for the precise measurement of compound angles or the curvature of an object. 

The Yaw axis (bottom stage) is capable of rotation of large angles and features a 180:1 ratio gear.

Motion Control – Absolute Encoder for Harsh Environments

Vaughan, Ontario, Canada — Motion Control Components — Netzer VLX encoders are ideal for OEM applications. Featuring an open frame, 2 plate design, the sensor is lightweight, highly tolerant to temperature, shock, EMI, RFI and magnetic fields. It offers a unique combination of high performance at an economical cost.

The VLX-60 is a new member of the VLX series of Electric Encoders™ a product line based on Netzer Precision Motion Sensor proprietary technology. EE products are characterized by features that enable unparalleled performance including:

Motion Control  – 20 mm Linear Stepper Motor!

Vaughan, Ontario, Canada — Motion Control  — Nippon Pulse is excited to introduce its smallest linear stepper motor yet, the PFL20 Linearstep. The PFL20 is a highly efficient, high thrust tin-can linear actuator with a 20mm diameter and a bipolar winding.

The motion control PFL20 is RoHS-compliant, has a 30/60mm effective stroke, and can reach 6 N of force at 200 pps. With 24 steps per revolution, the lead screw has a 1.2mm thread pitch; the PFL20 also reaches 5V rated voltage, resistance of 33 Ohms/phase and inductance of 12mH/phase. The datasheet with additional specifications can be found here.

Motion Control – Voice -Coil Stage

Van Nuys, CA – Motion Control – Components -– Moticont’s VCDS-051-089-01 series linear motion control voice coil stages feature a voice coil motor, a ball bearing linear slide, home switch, and an integral optical quadrature encoder with differential outputs. Measuring 13.5 in (342.9 mm) long x 4.00 in. (101.6) wide x 3.755 in. (95.4 mm) high, the VCDS-051-089-01 series stages have a linear travel of 2.20 in. (55.9 mm); a continuous force of 6.0 lbs (26.7 N) and a peak force of 19 lbs (84.3 N) (at a 10% duty cycle).

Motion Control – Yaw Pitch Stages

Van Nuys, CA – — Motion Control – A new, series of Dual-axis Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). This new series of high precision Yaw-and-Pitch stages are ideal for precise measurements of compound curves and angles of an object during inspection or reverse engineering, laser machining and drilling, scanning, tracking, mirror positioning, and for use with coordinate measuring machines and autocollimators.

Motion Control – Automation – Improved Tabletop Robot for Cell Production Applications, Featuring Significantly Higher Payload, Maximum Speed and Rigidity!

Vaughan, Ontario, Canada — Motion Control – Automation-Intelligent Actuator Inc. announces the release of its new TTA Series Tabletop Robots. Features include:

• Significantly Higher Payload and Maximum Speed-

Max Payload: Work Part Side (X Axis): 20 kg, Tool Side (Z Axis): 5 kg

Max Speed: X Axis: 800 mm/sec, Y Axis: 800 mm/sec, Z Axis: 400 mm/sec.

Motion Control – NEW! Three-axis Gimbal Mounts!

Van Nuys, CA —– Motion Control – OES (Optimal Engineering Systems, Inc.) has released four all new Three-axis Azimuth, Angular Elevation, and Roll Gimbal Mounts. These new high precision and high stability AU270-AER Gimbal Mounts locate the surface of the Roll Stage 115 mm below the center line of rotation allowing for the positioning of: Cameras, optics, lasers and instrumentation for scanning, tracking, positioning, pointing, and other applications on their respective centerlines.

Motion Control – Integrated Spindle Drive Motor

Vaughan, Ontario, Canada — Motion Control Products — JVL A/S, one of the world’s leading producers in the field of integrated servo and stepper motors, is announcing a new addition to its ServoStep™ motors, a directly mountable motor for driving spindles. It’s perfect for replacing hand wheels in format change applications.

All-in-one unit

ServoStep™ has everything built-in including motor, encoder, drive electronics, control electronics with ePLC™ and optional Ethernet or CAN bus integrated into one compact unit.

Motion Control – Open Aperture Voice Coil Motor

Van Nuys, CA – Motion Control – Low inertia hollow core voice coil or moving coil linear motors from Moticont feature high acceleration, precise positioning to less than one micron (0.00004 in.), high reliability, and low cost. The cleanroom friendly, non-commutated motors are available in 23 off-the-shelf standard sizes, Moticont hollow core voice coil linear motors have open apertures of 0.125 in. (3.2 mm) to 2.000 in. (50.8 mm).

Motion Control – Motorized Rotary Stage!

Van Nuys, CA —– Motion Control – Rotary Stages – A rotary stage is a component of a motion system used to restrict an object to a single axis of rotation. The terms rotary table or rotation stage are often used interchangeably with rotary stage. Our rotary stages provide accurate positioning performance in a low profile and compact footprint. They are perfect for the limitations and requirements of the laboratory and are also used in manufacturing environments. These stages are ideal for optics, measurement, alignment and other demanding applications.

Motion Control Integrated Step Motors

Vaughan, Ontario, Canada — Motion Control Components — JVL Industri Elektronik A/S, one of the world leaders in the field of integrated servo – and stepper motors introduces a new compact and slim stepper motor. The new ServoStep integrated stepper motor series MIS171 to MIS176 have a NEMA 17 42×42 mm flange and include controller with 6 different industrial Ethernet protocols, absolute multiturn encoder, closed loop and M12 connectors. This new motor family is based on the latest microprocessor and cooling technology and an advancement compared to previous designs.

All the necessary electronics in a stepper system are integrated in the motor itself and are similar to the concept used by other JVL motors, making it very easy to use in all kind of motion control stepper or servomotor applications.

Motion Control – Electric Cylinder!

Van Nuys, CA — motion control – Moticont has introduced their highest force linear actuator in their DDLM Linear Actuator Series. The DDLM-038-051-01Linear Actuator is a low cost non-commutated linear actuator that is easily integrated into new and existing applications, and is the ideal choice when upgrading from a pneumatic system. Compact, clean, and quiet, this fully enclosed linear actuator, also referred to as an electric cylinder, is 1.500 in. (38.1 mm) in diameter with a housing length of 2.00 in. (50.4 mm) long.