|Spring Applied Brakes for Servo & Stepper Motors Available from Servo2Go!
Greenville, DE -- Available from SERVO2GO! -- SAB brakes from Inertia Dynamics are designed to be engaged and disengaged in a static condition at zero RPM. They are best used as a parking brake to hold a load in position. These brakes can be mounted to a flange or motor using thru-holes or tapped holes in the field cup. A conduit box is optional.
SAB brakes have been used extensively for servo brake applications. High temperature coil insulations are available upon request. The SAB brakes are rated up to 1200 Lb-in static torque, and fit motors up to 6.5" OD.
- 12V, 24V, 90VDC or 120VAC windings
- Static torque to 1200 lb-in
- Bore sizes from 3/8" to 1.5"
- Low current consumption
- Low cost
- Metric bores & special voltages available
To view the specification on the Inertia Dynamics family of Spring Applied Brakes available from Servo2Go - Click on the link below
Inertia Dynamics Products are available through www.Servo2Go.com
For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at firstname.lastname@example.org or visit Servo2Go.com at: www.Servo2Go.com