|Economical Direct Drive Linear Motors Feature: High Speed, No Backlash, and Zero Cogging!
Van Nuys, CA - Motion Control Components - Moticont's DDLMs (Direct Drive Linear Motors) eliminate backlash and provide an economical solution for users requiring high acceleration, high speed, and long life. They are available in three popular off-the-shelf models. The compact DDLM-019-044-01, linear motor is only 0.75 in. (19.1 mm) in diameter and 1.75 in. (44.5 mm) long. It has a stroke of 0.46 in. (11.7 mm), and features 11.0 oz (3.1 N) of continuous force and 34.8 oz (9.7 N) peak. The compact, longer stroke DDLM-019-070-01, linear motor is also only 0.75 in. (19.1 mm) in diameter but is 2.75 in. (69.9 mm) long. It has a stroke of 0.96 in. (24.4 mm), and features 10.1oz (2.8 N) of continuous force and 32.1oz (8.9 N) peak. For higher force applications the DDLM-038-051-01 linear motor is 1.5 in. (38.1 mm) in diameter and 2.00 in. (38.1 mm) long. It has a stroke of 0.375 in. (9.5 mm) with a continuous force of 3.1 lbs (14.0 N) and 9.9 lbs (44.1 N) peak.
These very compact motors can be easily integrated into new and existing applications using threaded features on the front and rear faces of the motor, as well as each end of the shaft. The feed-back devices, amplifiers and controllers are also available. If a motor with a longer stroke and/or greater force is required please request additional information from the factory.
Typical DDLM direct drive motor applications include: Automated assembly, component insertion, fluid dispensing, pick-and-place, robotics, wafer handling, sorting, valve and flow control, labeling, tension control, and laser machining in the processing, manufacturing, medical, inspection, metrology and other industries.
About Moticont - Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.
Moticont is committed to exceeding their customers' quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.
We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.
For additional information contact Moticont, "A Motion Company" at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: (888) 785-1804, Fax: (818) 785-5713, E-Mail: email@example.com or visit the website at http://www.moticont.com