|Stepper Motor Driver Has Up to 10 Amps and 80 Volts!
Morgan Hill, CA - Motion Control -Lin Engineering is pleased to announce the Beta release of the new R1025 stepper motor driver. Combining high performance with a wide spectrum of features, the R1025 can be utilized with stepper motors of many shapes and sizes.
The R1025 microstepping driver is capable of output currents ranging from 0.8 to 10.0 amps peak while handling +12 to 80VDC of input voltage. With selectable step resolutions from Full stepping to 256x microstepping, the R1025 stepper driver is capable of stepping a typical 1.8 degree motor over 51,000 steps per revolution! The R1025 also boasts three selectable damping modes for smooth motion and three optically isolated inputs. One of the biggest advantages of the R1025 is its ease of use; with on-board DIP switches, there is no need to connect this device to a computer making set-up quick and simple.
Overview - MICROSTEPPING DRIVER R1025
- Operates from +12 to 80 VDC
- Selectable run currents from 0.8 to 10 Amps Peak Holding
- and Running Torque
- Step Resolutions from Full step, 2x, 4x, 5x, 8x, 10x, 16x,
- 25x, 32x, 50x, 64x, 100x, 125x, 128x, 250x, 256x Microstepping
- Optically isolated inputs that can sink and source
- (3 to 24 VDC, 16mAmps)
- Selectable Damping modes for smooth motion:
- Easy to configure without connecting to PC; utilizes DIP switches
- - Run and hold current
- - Step resolution
- - Smoothness setting (fast and mixed decay modes)
- Operating temperature of -40C to 85C
- Operates in ambient temperature of -20C to 50C
Limited quantities of the R1025 stepper motor driver are available. Please contact your local sales representative or Lin Engineering for further details
Lin Engineering has earned the reputation as the technical leader in step motor design with the ability to "Maximize Torque at Desired Speed."
Founded by Ted T. Lin in 1987, Lin Engineering began as a consulting company specializing in step motor applications. Throughout the company’s history, it has continued to develop its capabilities in the areas of design engineering, manufacturing and customer service. Lin Engineering has developed its product line to include drivers, optical encoders, power supplies, spur and planetary gearboxes, and integrated step motor drives.
For additional information about the 10 Amps, 80 Volts, Stepper Motor Driver, contact Lin Engineering at 16245 Vineyard Blvd., Morgan Hill, CA 95037. Tel: 408-919-0200, Fax 408/919-0201, or e-mail us at email@example.com and say, "I saw it in MotionShop.com" or visit our Web site at http://www.linengineering.com.
Add Your Product/Company | Need a Website? | Need a Product Release?
"MotionShop.com", "The Motion Control Home Page", and "Motion Control Archive" are trademarks of E-Media Publishing. Other product and company names are trademarks or registered trademarks of their respective holders.
Copyright © 1997-2019 E-Media Publishing - Motion Control Marketing<