|Linear Motion Control Application - How Would You Position Components On An Experimental Reactor Vessel Weighing 33 Tons?
Easy ... Using Custom made LM76 Jet Rail Bearings and Shafting!
E. Longmeadow, MA -When a privately funded research company was ready to move from their original Proof of Concept to a sustainable fusion reactor to produce clean sustainable energy, they realized that extremely heavy components would need to be assembled and disassembled and reassembled again for design modifications and maintenance. The completed assembly would be the length of two buses and easy alignment of the individual components would be critical.
The main reactor, the fusion containment chamber that is capable of containing a plasma medium of 10 to 15 million degrees is made of non-magnetic stainless steel as are many of the components. The Plasma Medium could be described as a football shaped blob about 1 meter in diameter by 2 meters long. The plasma medium is injected from each end of the reactor assembly by Plasma Guns.
See photo to the right - On each end of the assembly is a Plasma Gun. The Plasma Guns as are all the floor lever components, are positioned using LM76 Jet Rail Bearings and shafting. The Jet Rail Bearings and Shafting can be seen near to bottom of the picture.
In addition to the reactor, high energy particle beam generators are positioned at angles to the fusion containment chamber. These particle bean generators would form and suspend the plasma medium for an indefinite period of time in the center of the containment chamber. These generators have to be easily positioned by hand - to accommodate adjustments and re-assembly.
See photo to the left - Nuteral-Beam Injectors are positioned around the Reaction Chamber to position and shape the Plasma Medium. These are also moved into position on LM76 Jet Rail Bearings and Shafting.
In addition to supporting the weight of the components, the bearings selected to move these massive loads during the construction and testing of the fusion reactor would have to be non-magnetic. Working with engineers, LM76 developed a custom 3 inch Jet Rail Bearing designed to carry both the weight of the fusion reactor and the high energy particle generators. In addition LM76 supplied precision ground, 3 inch 303 stainless steel (non-magnetic) shafting.
The custom manufactured Jet Rail Roller Blocks and 303 stainless steel shafting simplified the assembly/disassembly of the fusion containment chamber and components while ensuring critical alignment throughout travel.
This breakthrough fusion reactor is still in the experimental stage. A commercially viable reactor would need to contain 100 million degrees. Why is the project so important? Because in addition to producing sustainable energy, its only by-product is, environmentally safe, “helium ash.”.
See photo below - The drawing below shows all the components in place. The assembly is 60 meters long and supported on LM76 jet Rail Bearings and Shafting.
Add Your Product/Company | Need a Website? | Need a Product Release?
For additional information about Jet Rail Linear Bearings and Shafting from LM76 go to: http://www.lm76.com/jet_rail.htm
About LM76:LM76 was founded on engineering innovation. Our first product, the ceramic coated linear bearing, was the “original” replacement for linear ball bearings 1976. LM76’a hallmark is Engineering Excellence. Whether it’s a linear sleeve style bearing, a ball linear bearing, a roller bearing block or a complete linear slide, LM76 will design around your application and choose the correct technology and the best possible product. We design SUCCESS. For more information, call Mike Quinn
To see all of LM76's Products and Application Stories featured on MotionShop.com, enter lm76 in the Google custom search box (upper left, above)
For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: firstname.lastname@example.org or visit the website at http://www.lm76.com
And say, "I saw it on MotionShop.com, "The Motion Control Home Page."
"MotionShop.com", "The Motion Control Home Page", and "Motion Control Archive" are trademarks of E-Media Publishing. Other product and company names are trademarks or registered trademarks of their respective holders.
Copyright © 1997-2019 E-Media Publishing - Motion Control Marketing