|Linear Motion - New! Voice Coil Actuators with Integral Linear Bearings Are Available from Stock!
Santa Clarita, CA Compact, High Speed, High Acceleration, Zero Cogging, with integral linear bearings are features of the NCC Series of linear motion Voice Coil Actuators releases by H2W Technologies. NCC Series Voice Coil Actuators are available from stock with strokes up to 5.2 in. (132 mm); longer strokes are available on request. The internal shaft and bushing bearing system guides the coil as it moves and allows for a compact overall size.
This NCC Series of Voice Coil actuators offers high speed, high acceleration up to 20 g’s, zero cogging, high resolution to 8.3 µm/m (0.0001 in./ft), high repeatability to 5 µm (0.0002 in.) dependent on the encoder, and long life. These high speed linear actuators are ideal for light load applications requiring high acceleration, high accuracy, repeatability, and a long stroke such as: Position control, Z-axis for pick-and-place equipment, robotics, testing, medical diagnostic probes and test equipment.
The NCC05-11-011-1PBS voice coil linear actuator (shown in photo) is a compact 2.250 in. (57.15 mm) long (at mid-stroke) X 1.100 in. (30.48 mm) diameter. Threaded mounting holes allow for easy integration into new or existing applications. The stroke length is 0.5 in. (12.7 mm), continuous force is 1.1 lbs(4.9 N), and it has a peak force of 3.3 lbs (14.7 N). The internal, stainless steel shaft and nylon linear bushings provide: Low cost , high cycle rate, and long life.
For high accuracy, high repeatability closed loop operation, moving magnet voice coil linear actuators require a linear encoder, linear servo amplifier, and programmable motion controller which are available as a complete motion control, plug-and-play system from H2W Technologies. mounting configurations as well as complete motion control systems (including electronics) can be provided.
H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors include: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors include: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages
Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.
With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.
For additional information contact Mark Wilson at H2W Technologies, 26470 Ruether Avenue #102, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: firstname.lastname@example.org or visit the website at http://www.h2wtech.com
Add Your Product/Company | Need a Website? | Need a Product Release?
"MotionShop.com", "The Motion Control Home Page", and "Motion Control Archive" are trademarks of E-Media Publishing. Other product and company names are trademarks or registered trademarks of their respective holders.
Copyright © 1997-2017 E-Media Publishing - Motion Control Marketing