|Motion Control - Six-Axis Linear and Rotary Positioning Stage
Santa Clarita, CA -- Motion Control - The SRS-080-10-020-01-3EXRTS is a six-axis positioning stage that consists of three rotary motors, with encoders, each mounted to three independently moving linear axis. It is ideal for applications that require independent multiple motions on a single travel plane.
Each linear axis uses a H2W brushless linear motor BLDM-D06 to generate a continuous/peak force of 24.8 lbs [110 N]/74.5 lbs [331 N] with each moving table capable of a total stroke length of 82 in [2083 mm]. Each linear axis has an independent non-contact 1.0-micron resolution encoder head reading a single encoder scale allowing for precise positioning using any multi-axis motion controller. Each moving table is guided by a rigid recirculating ball linear bearing block sharing a single linear bearing rail.
Each rotary axis consists of a standard 34-frame rotary stepper motor with a 40,000 counts/rev resolution encoder. Using a state-of-the-art motion control electronics package provided by H2W, each rotary stepper motor can operate as a 2-phase rotary brushless motor. Each motor can generate a continuous torque of 27.1 oz-in [3.06 N-m]. Each rotary axis is removable, which, in turn, reduces the moving weight of the linear axis to which it was mounted. This allows for larger payloads on each linear axis.
The entire stage is assembled on a single piece of aluminum extrusion, thus reducing the overall weight of the system. It has end-of-travel rubber bumper stops, a home positioning sensor, end-of-travel-sensors, and custom mounting holes are available upon request. There are also provisions that allow customer cables to be routed within the cable carriers.
- Multiple linear motors on single magnet track Combined linear and rotary displacement
- Rotary axis is capable of full 360-degree rotation
- Ability to run closed loop rotary stepper motors
- Rotary axis can be easily removed
- Six axis of coordinated motion
- Assembled on a single piece of aluminum extrusion
- Cable carriers to route customer payload cables
About H2W Technologies, Inc.
H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.
Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.
With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.
To see all of H2W Technologies' Products and Application Stories featured on MotionShop.com, enter h2w in the Google custom search box (upper left, above)
See Article: https://www.h2wtech.com/article/six-axis-linear-and-rotary-positioning-stage
See Video at Youtube: https://youtu.be/cfnl7wxrLCs
See Product: https://www.h2wtech.com/page/six-axis-linear-and-rotary-positioning-stage
For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: firstname.lastname@example.org or visit the website at http://www.h2wtech.com
Add Your Product/Company | Need a Website? | Need a Product Release?
"MotionShop.com", "The Motion Control Home Page", and "Motion Control Archive" are trademarks of E-Media Publishing. Other product and company names are trademarks or registered trademarks of their respective holders.
Copyright © 1997-2018 E-Media Publishing - Motion Control Marketing