|Motion Control - Compact High Force Iron Core Brushless Linear Motor!.
Santa Clarita, CA - Motion Control - H2W engineers have developed a compact high force brushless linear motor (BLSM-1F) that can generate 300 lbs [1330 N] at a 10% duty cycle and 100 lbs [444 N] at a 100% duty cycle, and, when used with a matching magnet track (BLST-FSX). The mass of the coil assembly is 19 lbs [9 Kg] which gives a force to moving mass ratio of 15:8
The motor can be driven using either a trapezoidal or digital standard three phase brushless amplifier. The Brushless Linear Motor Coil measures 6.53 in X 7.50 in x 1.50 in [170 mm x 190 mm x 38 mm]. This Brushless Linear Motor is designed for applications that require a wide speed range and a relatively high force. This motor is encapsulated using high temperature 350°F [176°C] thermally conductive potting compound which protects the components and seals it from dust and moisture.
The 3-phase brushless linear motors, also known as an AC linear servo motors, are direct drive motors that are ideal for long stroke, closed loop servo, linear motion applications. They can be used at speeds up to 240 in/sec [6 m/sec]. They are capable of very precise position, velocity and acceleration control when coupled with a linear encoder for position feedback.
The laminated 3 phase wound coil assembly is used in conjunction with a linear magnet track to produce a controlled linear force. A customer supplied bearing system is required to maintain the .060 in [1.5 mm] air gap between the coil assembly and the magnet track. There is a relatively large attractive force between the motor coil and the magnet assembly. The magnet track consists of rare earth neodymium magnets and the require overall length is equal to the coil assembly length plus the stroke length.
- Uses a standard three-phase brushless amplifier
- Multiple coils can operate on the same magnet track assembly
- High force to moving mass ratio
- The magnetic attractive force between the coil and magnet track assemblies creates preload for a bearing system
Typical Brushless Linear Motor Applications:
- Coordinate Measurement Machines
- Laser and Water Jet Cutting
About H2W Technologies, Inc.
H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.
Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.
With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.
To see all of H2W Technologies' Products and Application Stories featured on MotionShop.com, enter h2w in the Google custom search box (upper left, above)
See Newsletter: https://www.h2wtech.com/article/compact-high-force-ironcore-brushless-linear-motor
See Product: https://www.h2wtech.com/product/brushless-linear/BLSM-1F"
For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: email@example.com or visit the website at http://www.h2wtech.com
Add Your Product/Company | Need a Website? | Need a Product Release?
"MotionShop.com", "The Motion Control Home Page", and "Motion Control Archive" are trademarks of E-Media Publishing. Other product and company names are trademarks or registered trademarks of their respective holders.
Copyright © 1997-2020 E-Media Publishing - Motion Control Marketing